Hi there,
We successfully configured a site to site (S2S) VPN with a Cisco ASA5505 and an Azure virtual network. Some time later we then realised we needed a point to site (P2S) VPN to co-exist with this on Azure to facilitate a client SSL type VPN. It turned out that the Azure virtual network could not be modified once there was a service running. So we deleted the VM, keeping the disks, deleted the gateway and re-created the virtual network this time selecting S2S and P2S configurations. We got the P2S working fine but now the S2S will not connect. We have edited the configuration to use dynamic routes instead of a static route as specified by Microsoft, which we used originally and also edited to use to use Ikev2. Any help would be appreciated.
Regards
Gerry
We successfully configured a site to site (S2S) VPN with a Cisco ASA5505 and an Azure virtual network. Some time later we then realised we needed a point to site (P2S) VPN to co-exist with this on Azure to facilitate a client SSL type VPN. It turned out that the Azure virtual network could not be modified once there was a service running. So we deleted the VM, keeping the disks, deleted the gateway and re-created the virtual network this time selecting S2S and P2S configurations. We got the P2S working fine but now the S2S will not connect. We have edited the configuration to use dynamic routes instead of a static route as specified by Microsoft, which we used originally and also edited to use to use Ikev2. Any help would be appreciated.
Regards
Gerry