Good day All,
I'm new to azure and I'm having a bit of difficulty setting up a site to site vpn to my cisco RV110W Wireless-N VPN Firewall.Below are the parameters I can enter. Is my vpn device compatible? What parameters do I need to change to maintain a connection? Any assistance is greatly appreciated.
IKE Policy Configuration
Policy Name: AStoEBS
Exchange Mode:Main
IKE SA Parameters
Encryption Algorithm: AES-128
Authentication Algorithm: SHA-1
Pre-Shared Key: xxxxxxxxxxxx
Diffie-Hellman (DH) Group: Group2 (1024bit)
SA-Lifetime: 3600
Dead Peer Detection: Yes
DPD Delay: 10
DPD Timeout: 30
VPN Policy Configuration
Policy Type: Auto Policy
Remote Endpoint: 000.000.000.000
Local Traffic Selection
Local IP: Subnet-> 192.168.1.1->255.255.255.0
Remote Traffic Selection
Remote IP: Subnet-> 192.168.2.1->255.255.255.0
Manual Policy Parameters
SPI-Incoming: 0x
SPI-Outgoing: 0x
Encryption Algorithm: 3DES
Key-In: None
Key-Out:None
Integrity Algorithm: SHA-1
Key-In: None
Key-Out: None
Auto Policy Parameters
SA-Lifetime: 28800
Encryption Algorithm: AES-128
Integrity Algorithm: SHA-1
PFS Key Group: Yes -> DH-Group 2(1024bit)
Select IKE Policy: AStoEBS