Hello,
I am establishing a VPN site to site with "Juniper srx3400 Junos Software Release 12.1x44-d35.5" however failed to establish the VPN. the connection log*1 shows me the following:
"...
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Dispatching STOP control code to WfpMidlObjectHandler
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Event handled successfully.
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Dispatching STOP control code to FwppNameCacheHandler
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Event handled successfully.
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Dispatching STOP control code to FwppReplicaHandler
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Event handled successfully.
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Dispatching STOP control code to FwppMemHandler
[0]0724.029C::03/30/2015-21:27:09.722 [user] |NULL|Event handled successfully.
Unknown( 23): GUID=0a0c7439-5f06-4edc-c528-eccb8aee9037 (No Format Information found).
Unknown( 10): GUID=29ad24a5-acd1-03fb-fbf5-339cd662b176 (No Format Information found).
Unknown( 11): GUID=29ad24a5-acd1-03fb-fbf5-339cd662b176 (No Format Information found).
[0]0150.0A30::03/30/2015-21:27:11.785 [ikeext] 0|xx.4.31.2|Local Address: xx.xx.xx.xx.500 Protocol 0
[0]0150.0A30::03/30/2015-21:27:11.785 [ikeext] 0|xx.4.31.2|Peer Address: xx.xx.xx.xx.500 Protocol 0
Unknown( 12): GUID=29ad24a5-acd1-03fb-fbf5-339cd662b176 (No Format Information found).
Unknown( 13): GUID=29ad24a5-acd1-03fb-fbf5-339cd662b176 (No Format Information found).
[0]0150.0A30::03/30/2015-21:27:11.785 [ikeext] 0|xx.4.31.2|iCookie 395c97576da96f65 rCookie 0000000000000000
[0]0150.0A30::03/30/2015-21:27:11.785 [ikeext] 0|xx.4.31.2|Exchange type: IKE Main Mode Length 288 NextPayload SA Flags 0x0 Messid 0x00000000
Unknown( 23): GUID=08bde363-89a7-96f6-73de-58dd49d49245 (No Format Information found).
Unknown( 24): GUID=08bde363-89a7-96f6-73de-58dd49d49245 (No Format Information found).
Unknown( 10): GUID=a608e25a-0413-a430-ae2f-1ad586d08d74 (No Format Information found).
[0]0150.0A30::03/30/2015-21:27:11.786 [user] |xx.4.31.2|IkeMatchFwpmFilter failed with Windows error 13825(ERROR_IPSEC_IKE_NO_POLICY)
[0]0150.0A30::03/30/2015-21:27:11.786 [user] |xx.4.31.2|IkeMatchFwpmFilter failed with HRESULT 0x80073601(ERROR_IPSEC_IKE_NO_POLICY)
[0]0150.0A30::03/30/2015-21:27:11.786 [user] |xx.4.31.2|IkeFindMMPolicy failed with HRESULT 0x80073601(ERROR_IPSEC_IKE_NO_POLICY)
[0]0150.0A30::03/30/2015-21:27:11.786 [ikeext] 0|xx.4.31.2|IKE diagnostic event:
Event Header:
Timestamp: 1601-01-01T00:00:00.000Z
Flags: 0x00000106
Local address field set
Remote address field set
IP version field set
IP version: IPv4
IP protocol: 0
Local address: 23.101.177.244
Remote address: 200.4.31.2
Local Port: 0
Remote Port: 0
Application ID:
User SID: <invalid>
Failure type: IKE/Authip Main Mode Failure
Type specific info:
Failure error code:0x00003601
No policy configured
Failure point: Local
Flags: 0x00000000
Keying module type: Ike
MM State: Initial state, no packets sent
MM SA role: Responder
MM auth method: Unknown
Cert hash:
0000000000000000000000000000000000000000
MM ID: 0x000000000000343e
MM Filter ID: 0x0000000000000000
Local Principal Name:
Remote Principal Name:
Local Principal Group SIDs:
Remote Principal Group SIDs:
...."
Which is not set in azure policies.
Could help validate as I can correct this problem "No policy configured"
thank you very much
Jonathan Obando
*1=http://blogs.technet.com/b/keithmayer/archive/2014/12/18/diagnose-azure-virtual-network-vpn-connectivity-issues-with-powershell.aspx